RAD Studio VCL Reference
ContentsIndex
PreviousUpNext
TComponent.ComponentCount Property

Indicates the number of components owned by the component.

Pascal
property ComponentCount: Integer;
C++
__property int ComponentCount;

Use the ComponentCount property to determine the number of components owned by a component, for example, when iterating through the components list to perform some action on all owned components. The ComponentCount property equals the number of items in the components list. This value is one more than the highest Components index, because the first components index is 0.  

C++ Examples: 

 

/*
This code fragment moves any nonvisual components on the 
form into a separate data module. Note that the components 
are removed starting with the last component, so that the 
unprocessed portion of the Components array does not change.
Note: This code does not save the form or data module to disk
after the nonvisual components are moved.  If executed at 
runtime, the effect will not persist.
Add a second TForm and name it ComponentCount2.  Put 
"#include ComponentCount2.cpp" in ComponentCount.h.  
Place a TMemo in each form and a TButton in Form1.
*/

void __fastcall TForm1::Button1Click(TObject *Sender)
{
  int I;
  TComponent *Temp;
  Memo1->Lines->Add("Components removed: ");
  Form2->Memo1->Lines->Add("Components added: ");
  for (I = ComponentCount - 1; I >= 0; I--)
  {
    Temp = Components[I];
    // only move components that are not controls
    if (dynamic_cast<TControl *>(Temp) == NULL)
    {
      RemoveComponent(Temp);
      Memo1->Lines->Add(Temp->Name);
      Form2->InsertComponent(Temp);
      Form2->Memo1->Lines->Add(Temp->Name);
    }
  }
}

 

Delphi Examples: 

{
This code fragment moves any nonvisual components on the 
form into a separate data module. Note that the components 
are removed starting with the last component, so that the 
unprocessed portion of the Components array does not change.
Note: This code does not save the form or data module to disk
after the nonvisual components are moved.  If executed at 
runtime, the effect will not persist.
Add a second TForm and name it ComponentCount2.  Put 
"ComponentCount2" at the end of the uses clause of Form1.  
Place a TMemo in each form and a TButton in Form1.
} 

procedure TForm1.Button1Click(Sender: TObject);
var
  I: Integer;
  Temp: TComponent;
begin
  Form1.Memo1.Lines.Add('Components removed: ');
  Form2.Memo1.Lines.Add('Components added: ');
  for I := ComponentCount - 1 downto 0 do
  begin
    Temp := Components[I];
    if not (Temp is TControl) then
    begin
      RemoveComponent(Temp);
      Form1.Memo1.Lines.Add(Temp.Name);
      Form2.InsertComponent(Temp);
      Form2.Memo1.Lines.Add(Temp.Name);
    end;
  end;
end;
{
Here is the code on Form1 that fills the list box.
}
var
  Form1: TForm1;
  Customers: TTable;
  Blobs: TTable;
  Form1Done : Boolean;
  procedure CreateMyTable;
  procedure CreateCustSource;
  procedure CreateBlobSource;

implementation

{$R *.dfm}

procedure TForm1.FormCreate(Sender: TObject);
var
  I: Integer;
begin
  CreateCustSource;
  CreateBlobSource;
  for I := 0 to ComponentCount - 1 do
  begin
    if (Components[I] is TDataSource) then
      ListBox1.Items.AddObject(Components[I].Name,
        Components[I] as TObject);
  end;
end;

procedure CreateCustSource();
begin
  Customers:= TTable.Create(Form1);
  with Customers do
  begin
    DatabaseName := 'DBDEMOS';
    TableType := ttParadox;
    TableName := 'MyCustInfo';
    ReadOnly:= False;

//    Don't overwrite an existing table
    if (not Customers.Exists) then CreateMyTable
    else
    begin
      if (Customers.Exists AND
        (MessageDlg('MyCustInfo table already exists.  Do you want to rebuild it?', mtConfirmation, [mbYes, mbNo], 0) = mrYes)) then
      begin
        Customers.Close;
        Customers.DeleteTable;
        CreateMyTable;
      end;
    end;
  end;
  Form1.CustomerDS.DataSet:= Customers;
  Customers.Active:= True;
end;

procedure CreateMyTable();
var
  i: Integer;
begin
//      The Table component must not be active
//      First, describe the type of table and give
//      it a name
//      Next, describe the fields in the table
  with Customers do
  begin
      with FieldDefs do
      begin
        Clear;
        with AddFieldDef do
        begin
          Name := 'Field1';
          DataType := ftInteger;
          Required := True;
        end;
        with AddFieldDef do
        begin
          Name := 'Field2';
          DataType := ftString;
          Size := 30;
        end;
        with AddFieldDef do
        begin
          Name := 'Field3';
          DataType := ftString;
          Size := 30;
        end;
        with AddFieldDef do
        begin
          Name := 'Field4';
          DataType := ftString;
          Size := 30;
        end;
      end;

//    Take out this part to remove indexing
//    Next, describe any indexes
      with IndexDefs do
      begin
        Clear;
//        The 1st index has no name because it is
//        a Paradox primary key
        with AddIndexDef do
        begin
          Name := '';
          Fields := 'Field1';
          Options := [ixPrimary];
        end;
        with AddIndexDef do
        begin
          Name := 'Fld2Indx';
          Fields := 'Field2';
          Options := [ixCaseInsensitive];
        end;
      end;

//      Call the CreateTable method to create the table
      CreateTable;
      Customers.Active:= True;
      for i := 1 to 20 do
        Customers.AppendRecord([i*111, i*222, i*333, i*444]);
    end;
end;

procedure CreateBlobSource;
var
  i: Integer;
begin
  Blobs:= TTable.Create(Form1);
  with Blobs do
  begin
    DatabaseName := 'DBDEMOS';
    TableType := ttParadox;
    TableName := 'MyBlobInfo';
    Blobs.Active := False;
    { Don't overwrite an existing table }
//    if Blobs.Exists then
//      MessageDlg('CustInfo table already exists.', mtWarning, [mbOK], 0)
//    else
    begin
      if (Blobs.Exists) then
      begin
        Blobs.Close;
        Blobs.DeleteTable;
      end;
      { The Table component must not be active }
      { First, describe the type of table and give }
      { it a name }
      { Next, describe the fields in the table }
      with FieldDefs do
      begin
        Clear;
        with AddFieldDef do
        begin
          Name := 'Field1';
          DataType := ftInteger;
          Required := True;
        end;
        with AddFieldDef do
        begin
          Name := 'Field2';
          DataType := ftBlob;
          Size := 30;
        end;
      end;
      { Next, describe any indexes }
      with IndexDefs do
      begin
        Clear;
        { The 1st index has no name because it is
        { a Paradox primary key }
        with AddIndexDef do
        begin
          Name := '';
          Fields := 'Field1';
          Options := [ixPrimary];
        end;
{
        with AddIndexDef do
        begin
          Name := 'Fld2Indx';
          Fields := 'Field2';
          Options := [ixCaseInsensitive];
        end;
}
      end;
      { Call the CreateTable method to create the table }
      CreateTable;
      Blobs.Active:= True;
      for i := 1 to 20 do
        Blobs.AppendRecord([i*111, IntToStr(i*222)]);
    end;
  end;
  Form1.BlobDS.DataSet:= Blobs;
  Blobs.Active:= True;
end;

procedure TForm1.ListBox1MouseDown(Sender: TObject; Button: TMouseButton;
  Shift: TShiftState; X, Y: Integer);
begin
  Form1Done := True;
end;

initialization

Form1Done := False;
{
The following code sets the DataSource for a DBGrid
component in Form2 to the currently selected data source in
a list provided in Form1. This allows users to specify the
desired information in Form1, and then move to Form2 to view
the information. Select an item in the listbox and then
activate Form2 by clicking in it.
}
procedure TForm2.FormActivate(Sender: TObject);
begin
  if (Form1Done) then
  begin
    DBGrid2.DataSource :=
      Form1.ListBox1.Items.Objects[Form1.ListBox1.ItemIndex] as TDataSource;
    DBNavigator2.DataSource :=
      Form1.ListBox1.Items.Objects[Form1.ListBox1.ItemIndex] as TDataSource;
  end;
end;

 

Copyright(C) 2008 CodeGear(TM). All Rights Reserved.
What do you think about this topic? Send feedback!